How Many Quarts Does a 4L60E Hold

A 4L60E transmission holds approximately 14 quarts of transmission fluid. This is based on the GM specification for the 4L60E, which states that it should contain between 13.5 and 14.4 quarts of ATF-type Dexron III or Mercon V transmission fluid (or the equivalent). It is important to ensure that the correct type and amount of fluid is used in this model of transmission as using too much or too little can cause serious damage over time.

The 4L60E transmission is one of the most common automatic transmissions found in GM vehicles, and it has a total capacity of 10 quarts. This means that when performing any kind of maintenance or repair on your vehicle, it’s important to make sure you have enough fluid available for refilling the transmission. The amount necessary will depend on whether you are replacing just the filter and pan gasket, which requires 6 quarts, or if you’re doing a full flush and refill job which requires 9 quarts.

4L60e does not hold 17 quarts

What Fluid Does a 4L60E Take?

The 4L60E transmission is one of the most widely used automatic transmissions in modern vehicles. It’s a highly efficient, reliable and durable transmission which requires the appropriate maintenance to remain so. One important part of this maintenance is ensuring that it has enough fluid, as not having enough can cause serious damage to the internal components of your 4L60E transmission.

The type of fluid that should be put into a 4L60E transmission is Dexron-III Automatic Transmission Fluid (ATF). This oil lubricates all the moving parts in your transmission system, such as gears and bearings, helping them function correctly and preventing wear over time. Keeping up with regular oil changes will ensure optimal performance from your 4L60E for many years to come!

How Many Quarts Does a Torque Converter Hold?

The amount of quarts that a torque converter can hold is dependent on the size and type of the particular model. Generally speaking, most standard-sized torque converters contain between 4 to 6 quarts of fluid – smaller models containing slightly less while larger units may contain up to 10. It is important to ensure you are using the correct type and quantity of oil for your specific make/model as too little or too much oil could cause excessive wear or even damage your torque converter.

Additionally, because different makes and models require different viscosity ratings for their lubricants, you should always consult with a certified technician or manufacturer’s manual before attempting any service work on your own.

How Often Should You Change Transmission Fluid in a 4L60E?

When it comes to keeping your 4L60E transmission in peak condition, proper maintenance is key. One of the most important maintenance tasks that you should perform on a regular basis is changing the transmission fluid. The frequency with which you need to change this fluid depends on several factors such as how often you drive, what type of terrain and climate your vehicle operates in, and if there are any known issues with the transmission.

Generally speaking, transmission fluid for a 4L60E should be changed every 30,000 miles or 2 years whichever comes first. However, if your car drives through extreme climates (hot summers and cold winters) then it’s best to change the fluid every 20-25k miles instead. It’s also recommended to use only fluids certified by GM when servicing your 4L60E so that all parts can function properly without too much wear and tear over time.

What Size Transmission is a 4L60E?

The 4L60E transmission is a 4-speed automatic transmission that was introduced in the early 1990s. It replaced the 700R4 transmission and was found in many General Motors trucks, SUVs, sports cars and vans from 1992 through 2003. The 4L60E is a lightweight aluminum case with integrated bell housing design which fits both longitudinal and transverse engine applications.

It has an overall length of 17.7 inches (450 mm) with a maximum torque capacity rating of 360 lb·ft (490 N·m). It features 3 planetary gear sets, 5 friction clutches, 7 solenoids, several sensors and switches to control shift points based on vehicle speed. This makes it possible for the 4L60E to shift at higher speeds than its predecessor while still being able to handle more power and torque than other transmissions in its class.

How Many Quarts Does a 4L60E Hold


4L60E Transmission Fluid Capacity And Type

The 4L60E transmission is found in a variety of vehicles, ranging from domestic to foreign. It requires 8.5 quarts of Dexron III or Mercon V type automatic transmission fluid (ATF). To ensure that your vehicle’s ATF is at the proper level, it should be checked regularly and topped off as necessary.

4L60E Transmission Fluid And Filter Change

It is important to regularly change your 4L60E transmission fluid and filter. This will help ensure that your vehicle runs smoothly and efficiently, while reducing the risk of any damage occurring to the transmission system. It is recommended to have a professional mechanic perform this service every 50,000-100,000 miles or as specified in the owner’s manual.

During this service, all old fluid should be drained and replaced with a fresh supply of high-quality automatic transmission fluid which meets GM specifications. Additionally, the filter element should also be changed at this time since it can become clogged over time due to dirt build up.

4L60E Transmission Fluid Capacity Without Torque Converter

The 4L60E transmission fluid capacity without the torque converter is 8.4 quarts (7.9 liters). This number can vary slightly depending on your vehicle’s specific year, make, and model as well as the type of fluid used for lubrication. It’s important to consult your owner’s manual for an exact measurement so that you can ensure proper maintenance and operation of your vehicle’s transmission system.


In conclusion, the 4L60E transmission holds roughly 10 quarts of fluid. It is important to make sure that you use the correct type and amount of fluid in order to keep your transmission running smoothly and efficiently. Failure to do so can result in costly repairs or even a complete replacement down the line.

Make sure you always check your owner’s manual for specific details about your vehicle’s needs when it comes to transmission fluid!


  • Alex Gearhart

    Alex Gearhart, an automotive expert specializing in transmissions, has over a decade of hands-on industry experience. With extensive knowledge in manual and automatic systems, Alex is passionate about educating car enthusiasts on vehicle maintenance. As the chief author at, Alex simplifies complex concepts for readers, helping them make informed decisions about their vehicles. Outside of work, Alex enjoys road trips, restoring classic cars, and exploring new automotive technologies.

Leave a Comment