Transmission Fluid Temperature Sensor Replacement Cost

The cost of replacing a transmission fluid temperature sensor can vary depending on the make and model of your vehicle. The average cost for a sensor replacement is between $100 and $200.

If your car is leaking transmission fluid, it’s likely that the transmission fluid temperature sensor needs to be replaced. The average cost of this replacement is between $200 and $400, depending on the make and model of your car. If you’re experiencing transmission problems, it’s best to take your car to a mechanic and have them diagnose the problem.


Transmission Temperature Sensor Cost

If your car has an automatic transmission, then it likely has a transmission temperature sensor. This sensor is responsible for monitoring the temperature of the transmission fluid. If the fluid gets too hot, it can cause damage to the transmission.

The cost of a transmission temperature sensor can vary depending on the make and model of your car. Generally speaking, you can expect to pay anywhere from $20 to $100 for a replacement sensor. Of course, this does not include labor costs, so be sure to factor that in as well.

Where is the Transmission Fluid Temperature Sensor Located

The transmission fluid temperature sensor is located in the transmission, typically near the front of the unit. It monitors the temperature of the fluid and sends a signal to the control module. The module then uses this information to make adjustments to shift points and other functions.

If the sensor is not working properly, it can cause shifting problems and other drivability issues.

Transmission Sensor Symptoms

Symptoms of a Bad Transmission Sensor A bad transmission sensor can cause your car to experience a wide range of problems. The most common symptom is the Check Engine Light coming on.

Other symptoms include the car hesitating or stalling, gears slipping, and the transmission not shifting correctly. If you are experiencing any of these problems, it’s important to get your vehicle checked out by a mechanic as soon as possible. One of the first signs that something is wrong with your transmission sensor is if the Check Engine Light comes on.

This light can come on for a variety of reasons, so it’s important to have your car diagnosed by a mechanic to see if the problem is indeed a bad transmission sensor. Another symptom of this problem is if your car starts hesitating or stalling. This can be especially dangerous if it happens while you’re driving on the highway.

Gears may also start slipping, which can lead to further damage to your car’s transmission. In some cases, the transmission may not shift correctly, resulting in reduced performance from your vehicle overall. If you’re experiencing any of these issues, it’s important to take your car to a mechanic right away for diagnosis and repair.

A bad transmission sensor can cause serious damage to your car if it’s not fixed, so don’t delay in getting it checked out!

Transmission Speed Sensor Replacement Cost

A transmission speed sensor, also known as a vehicle speed sensor (VSS), is a devices that measures the speed of your car’s wheels and sends this information to the on-board computer. This data is then used by the computer to make various decisions such as when to shift gears. A faulty transmission speed sensor can cause all sorts of problems such as poor fuel economy, jerky shifting, or even prevent your car from starting.

The cost to replace a transmission speed sensor will vary depending on the make and model of your vehicle but it typically falls between $100-$200. In some cases, you may be able to replace just the sensor itself which will cost less than replacing the entire assembly.

How Long Does It Take to Replace a Transmission Sensor

Assuming you are talking about a transmission speed sensor, it should take no longer than two hours. You will need to jack up the car and remove the old sensor. Then clean off the area where the new one will go before inserting it and screwing it in place.

Once that is done, lower the car back down and test drive it to make sure everything is working correctly.

Transmission Temp Sensor Kit

You can find the Transmission Temp Sensor Kit here: If you are looking to install a transmission temp sensor kit, there are a few things that you should keep in mind. First, it is important to know where your transmission fluid dipstick is located.

This will help you avoid any potential messes when installing the new sensor. Secondly, make sure that you have all of the necessary tools on hand before beginning the installation process. Lastly, take your time and be careful when completing the installation so that everything is done correctly.

The first step is to remove the old sensor from its location. To do this, simply unscrew it from its position and pull it out. Next, take the new sensor and screw it into place.

Be sure to screw it in tightly so that it doesn’t come loose over time. Once the new sensor is in place, reattach your transmission fluid dipstick and replace any other panels or covers that may have been removed during installation.

Transmission Sensor Replacement

If your car is having issues with the transmission, one of the first things that should be checked is the transmission sensor. The sensor gathers information about the speed and position of the gears in order to signal the computer when to shift. If the sensor is not working properly, it can cause shifting problems or even prevent the car from starting.

Replacing a transmission sensor is generally a pretty easy job that can be done at home with just a few tools. You’ll need a socket wrench set, an extension cord, and a new transmission sensor. First, locate the old sensor on the side of the transmission.

It will be attached with two bolts. Use your socket wrench to remove these bolts and take out the old sensor. Next, take your new sensor and thread it into place using your fingers.

Once it’s in place, use your socket wrench to tighten down the bolts until they’re snug. Be careful not to overtighten them – just snug them up so they’re secure. Now reattach any wiring harnesses or cables that were disconnected when you removed the old sensor and you’re all set!

Transmission Sensors

As the name implies, a transmission sensor is a device that is used to monitor the condition of your car’s transmission. Transmission sensors are critical components of your vehicle’s electronic control system, and they play an important role in ensuring optimal performance of your car’s engine and transmission. There are a variety of different types of transmission sensors, but the most common ones are speed sensors and pressure sensors.

Speed sensors measure the rotational speed of your car’s gears and shafts, while pressure sensors measure the hydraulic pressure inside your car’s transmission. Transmission sensors provide vital information to your car’s computer, which uses this data to make adjustments to ensure optimal shift points and engine performance. If a transmission sensor fails, it can cause serious drivability issues such as hard shifts, delayed shifts, or even no shifting at all.

In some cases, a failed sensor can also cause damage to your car’s engine or transmission. If you suspect that one of your transmission sensors has failed, it’s important to have it checked out by a professional as soon as possible. A trained technician will be able to diagnose the problem and recommend the best course of action for repair or replacement.

Transmission Fluid Temperature Sensor Replacement Cost


What Happens When a Transmission Sensor Goes Out?

A transmission sensor is a vital piece of equipment in any vehicle. It helps to monitor the performance of the transmission and ensures that it is working properly. Without a functioning transmission sensor, your vehicle would not be able to change gears properly and could eventually lead to engine failure.

If you think that your transmission sensor may have gone out, it is important to take your car to a mechanic as soon as possible. They will be able to diagnose the problem and determine if the sensor needs to be replaced. In some cases, simply cleaning or resetting the sensor can fix the issue.

However, if the sensor is damaged beyond repair, then it will need to be replaced with a new one. While having a faulty transmission sensor can be frustrating, it is important to remember that they are relatively inexpensive parts and are easy to replace. With proper care and maintenance, your vehicle should continue running smoothly for many years to come!

How Long Does It Take to Replace Transmission Sensor?

Assuming you are referring to a transmission sensor on a vehicle, the answer can vary greatly. The process could be as simple as replacing an old or damaged sensor with a new one. But if the damage is more extensive, it could mean having to replace the entire transmission.

In that case, it would take much longer and be much more expensive.

What is a Transmission Fluid Temperature Sensor?

A transmission fluid temperature sensor is a small sensing device that is used to monitor the temperature of the automatic transmission fluid in a vehicle. The sensor is usually located on the side or bottom of the transmission pan, and it consists of a small metal probe that protrudes into the transmission fluid. The sensor measures the temperature of the fluid and sends a signal to the vehicle’s computer, which then uses this information to adjust various engine and transmission functions.

The most common reason for a transmission fluid temperature sensor to fail is due to corrosion or debris build-up on the probes. This can cause inaccurate readings or complete failure of the sensor. If your vehicle’s check engine light comes on, or if you notice any strange shifting patterns, it could be an indication that your transmission fluid temperature sensor needs to be replaced.

Can Temperature Sensor Affect Transmission?

Can Temperature Sensor Affect Transmission? As anyone who has ever driven in extreme cold or heat can attest, temperature can have a significant effect on your vehicle. While most people are aware that engine oil thickens in the cold and thins out in the heat, few realize that transmission fluid is also affected by temperature changes.

In fact, transmission fluid is even more sensitive to temperature than engine oil, making it vital to keep an eye on your vehicle’s transmission temperature sensor. Just like with engine oil, transmission fluid thickens in cold weather and becomes thinner in hot weather. This can cause a number of problems, as the wrong viscosity of transmission fluid can cause gears to slip or bind.

In extreme cases, it can even cause damage to the transmission itself. That’s why it’s so important to make sure your transmission fluid is at the correct viscosity for the current outside temperature. One way to do this is to check your vehicle’s owner’s manual.

Most manuals will have a section that lists the recommended viscosity range for your specific vehicle model. If you don’t have access to your manual, you can also check online for the recommended range. Once you know what range you should be aiming for, simply check the label on your bottle of transmission fluid; most will list both a low-temperature rating and a high-temperature rating.

As long as the current outside temperature falls within those two ratings, your transmission fluid should be fine. Of course, if you live in an area with extreme temperatures (either hot or cold), it’s always best to err on the side of caution and use a slightly higher-viscosity fluid than what is listed in your manual. For example, if you live in an area that regularly sees temperatures below freezing, using a “winter grade” transmission fluid may be a good idea.

These fluids are designed specifically for colder climates and will help protect your transmission from wear and tear caused by thickening fluids.


If your car is acting up and the check engine light is on, it could be because of a problem with the transmission fluid temperature sensor. This sensor monitors the temperature of the fluid and sends a signal to the car’s computer to let it know when the fluid is getting too hot. If the sensor isn’t working properly, it can cause all sorts of problems with your car’s transmission.

Luckily, replacing the sensor is relatively simple and won’t cost you too much money.


  • Alex Gearhart

    Alex Gearhart, an automotive expert specializing in transmissions, has over a decade of hands-on industry experience. With extensive knowledge in manual and automatic systems, Alex is passionate about educating car enthusiasts on vehicle maintenance. As the chief author at, Alex simplifies complex concepts for readers, helping them make informed decisions about their vehicles. Outside of work, Alex enjoys road trips, restoring classic cars, and exploring new automotive technologies.

Leave a Comment