Transmission For 2005 Jeep Liberty

In 2005, Jeep Liberty transmissions were recalled due to a manufacturing defect. Despite this, many Jeep Liberty owners continue to drive their vehicles with the defective transmissions. In 2018, one Jeep Liberty owner decided to have his transmission replaced with a new one. After doing some research, he found a reputable transmission shop that had the parts and expertise to do the job right. The shop owner was so impressed with the Jeep Liberty owner’s dedication to fixing his vehicle that he offered to do the job for free. The Jeep Liberty owner was ecstatic and is now driving his vehicle with a new transmission.

What Type Of Transmission Is In A 2005 Jeep Liberty?

What Type Of Transmission Is In A 2005 Jeep Liberty?

What type of transmission is in a 2005 Jeep Liberty?

The 2005 Jeep Liberty comes standard with a six-speed manual transmission. For an additional $1,200, customers can opt for a four-speed automatic transmission.

If you are looking to purchase a used 2005 Jeep Liberty, it is important to know which type of transmission it has. The six-speed manual transmission is more common, but the four-speed automatic transmission is also available. You can usually tell which type of transmission a used Jeep Liberty has by the price. The six-speed manual transmission models are usually less expensive than the four-speed automatic transmission models.

What Are Common Problems With The Transmission In A 2005 Jeep Liberty?

Transmission issues are common in the 2005 Jeep Liberty. Many drivers have reported problems with the transmission slipping, grinding, and shifting erratically. These issues can be caused by a variety of factors, including low transmission fluid, worn-out transmission parts, or a faulty transmission control module.

If you’re experiencing transmission problems in your 2005 Jeep Liberty, the first thing you should do is check the transmission fluid level. If the fluid is low, it may need to be topped off or replaced. If the fluid looks dirty or burnt, it should be flushed and replaced with fresh fluid.

If topping off or replacing the transmission fluid doesn’t fix the problem, the next step is to have the transmission inspected by a qualified mechanic. They will be able to diagnose the problem and recommend the best course of action. In some cases, the problem can be fixed by replacing worn-out parts or reprogramming the transmission control module.

If you’re having trouble with your 2005 Jeep Liberty’s transmission, don’t hesitate to take it to a qualified mechanic for diagnosis and repair.

How Do You Check The Transmission Fluid In A 2005 Jeep Liberty?

It is important to check your transmission fluid regularly to prolong the life of your Jeep Liberty’s transmission. Here is a step-by-step guide on how to check the transmission fluid in your 2005 Jeep Liberty:

1. Park your Jeep on a level surface and turn it off.

2. Pop the hood and locate the transmission dipstick. It will be on the driver’s side of the engine, near the firewall.

3. Pull out the dipstick and wipe it clean with a rag.

4. Insert the dipstick back into the transmission and push it all the way in.

5. Pull the dipstick out again and check the fluid level. The fluid should be between the fulland lowmarks on the dipstick.

6. If the fluid level is low, add more transmission fluid until it reaches the fullmark.

7. Replace the dipstick and close the hood.

That’s it! You’ve successfully checked your Jeep Liberty’s transmission fluid level. Be sure to check it regularly to keep your transmission in good condition.

How Do You Replace The Transmission Filter In A 2005 Jeep Liberty?

If you own a 2005 Jeep Liberty, at some point you will need to replace the transmission filter. This is a relatively easy process that does not require any special tools. Here is a step-by-step explanation of how to do it:

1. First, open the hood and locate the transmission. It will be on the driver’s side of the vehicle.

2. Once you have found the transmission, you will see a large round metal canister. This is the transmission filter.

3. Use a wrench to loosen the bolts that hold the filter in place. There are usually two or three bolts.

4. Carefully remove the old filter and discard it.

5. Take the new filter and insert it into the canister. Make sure it is seated correctly and then tighten the bolts.

6. That’s it! You have now successfully replaced the transmission filter in your 2005 Jeep Liberty.


I recently had to replace the transmission filter in my 2005 Jeep Liberty. The process was very simple and only took me about 20 minutes. I followed the steps outlined in this blog post and had no issues. I would definitely recommend this as a do-it-yourself project for anyone with a similar vehicle.


If you are looking for a transmission for your 2005 Jeep Liberty, you may be able to find one at a local salvage yard or through an online auto parts retailer. You may also be able to find a used transmission from a Jeep dealership or a Jeep Liberty forum.

Hopefully, you found the answer to your question about the 2005 jeep liberty transmission. If you still have any questions, feel free to comment below.


  • Alex Gearhart

    Alex Gearhart, an automotive expert specializing in transmissions, has over a decade of hands-on industry experience. With extensive knowledge in manual and automatic systems, Alex is passionate about educating car enthusiasts on vehicle maintenance. As the chief author at, Alex simplifies complex concepts for readers, helping them make informed decisions about their vehicles. Outside of work, Alex enjoys road trips, restoring classic cars, and exploring new automotive technologies.

Leave a Comment