Reset Check Engine Light Dodge Challenger

The Check Engine Light on a Dodge Challenger can be reset by using the OBD-II system. To do this, first locate the OBD-II port which is typically located beneath the dashboard or near the driver’s side kick panel. Then, use an OBD-II scanner to plug into that port and turn on your vehicle’s ignition but do not start it.

With your scanner, select “Reset” and follow any further instructions as prompted by your scanner in order to reset the Check Engine Light. This should clear out any stored codes from memory and remove warning lights from appearing on your dashboard display.

Resetting the check engine light on your Dodge Challenger is a simple, straightforward process. All you have to do is locate the OBD-II port under the dash, disconnect and reconnect it, and then start the car – that’s it! This will reset any error codes stored in memory and turn off your check engine light.

It’s an easy way to keep your vehicle running smoothly without having to visit a mechanic or dealership for expensive repairs.

How to reset service light on a 2016 Dodge Challenger

Can I Reset Check Engine Light Myself?

The check engine light is one of the most important indicators in a vehicle, alerting you to potential problems and allowing you to take action promptly. It can be frustrating when this light comes on unexpectedly, but it doesn’t necessarily spell doom for your car. In some cases, the issue that caused the light to come on in the first place may not even require any repair work; resetting the engine warning light yourself might do the trick!

But before attempting any DIY fixes, it’s important to understand what exactly can cause a check engine light and how best to go about resetting it if necessary. Generally speaking, modern vehicles have advanced onboard computer systems that detect various mechanical issues such as malfunctioning oxygen sensors or catalytic converters. When these components aren’t working correctly, they can trigger an error code which causes the warning lamp on your dashboard to illuminate.

Depending on your make and model of car, there are usually two ways of resetting this indicator: either manually through a button combination or with an OBD-II scanner tool. If you choose manual resetting then simply refer to your owner’s manual for instructions–they should tell you how many times and how long each key needs pressing while turning over ignition etc.–and follow them carefully. However if using a scanner tool then this will likely involve plugging into your OBD-II port under dash board (check user guide) and running through menu options until all codes are cleared from system memory – success!

Whether you opt for manual or auto methods though bear in mind that whilst these steps may restore power back up again they won’t solve underlying problem so be sure also have professional inspection too if needed afterwards just same as ever – safety 1st after all!

Why is the Check Engine Light on in My Dodge Challenger?

The check engine light in a Dodge Challenger is an important indicator of potential problems with the vehicle. It is designed to alert drivers to any issues that may be occurring under the hood, so it’s important to pay attention when this warning light appears. Common causes for the check engine light turning on include faulty spark plugs or wires, a faulty fuel injector, a defective oxygen sensor, low transmission fluid levels, and even loose gas caps.

However, if you’re not sure what caused your check engine light to turn on in the first place and don’t feel comfortable troubleshooting yourself, it’s best to take your car into an auto repair shop for diagnostics as soon as possible. A technician will be able to quickly identify any underlying issues and advise you on how best to proceed with repairs or replacement parts – ensuring that your Dodge Challenger remains safe and reliable while driving.

Can You Clear a Check Engine Light Without Fixing It?

The check engine light is an important indicator of the health of your car, and clearing it without fixing whatever problem caused it can be a dangerous practice. Not only does this leave you vulnerable to further damage to your vehicle, but if you have an emissions test coming up that requires a functioning check engine light, then driving with one out could result in costly fines or even failed inspections. If you’re able to identify what triggered the warning light, such as a loose gas cap or faulty spark plug wire, then addressing that issue first will help clear the code and turn off the light.

However, if there are more serious problems at play like a malfunctioning catalytic converter or oxygen sensor then it’s best to take your car into a professional mechanic who can diagnose and fix any underlying issues before resetting the check engine light.

Reset Check Engine Light Dodge Challenger


Reset Check Engine Light Dodge Charger

It is easy to reset the Check Engine Light on a Dodge Charger. All you need to do is locate the fuse box under the hood of your car and remove the ECU (Engine Control Unit) fuse for 30 seconds. Once that time has elapsed, replace the fuse and start your vehicle; this will have successfully reset your Check Engine Light and should resolve any problems with it.

How to Check Check Engine Light Dodge Challenger

If your Dodge Challenger is displaying a check engine light, there are several steps you can take to diagnose the issue. First, connect an OBD-II scanner to your vehicle’s diagnostic port and read any codes stored in the computer memory. You can then use these codes to determine what repair may be required.

If further assistance is needed, consult your owner’s manual or contact a certified mechanic for additional help with diagnosing and repairing the problem quickly and safely.

Dodge Challenger Check Engine Light Codes

If your Dodge Challenger’s check engine light comes on, it could be due to a variety of different issues. In order to diagnose the problem correctly, you’ll need to retrieve and interpret the specific codes that are stored in the vehicle’s onboard diagnostic system. This can be done by connecting a scanner device to your car’s computer, which will then allow you to view all trouble codes associated with your particular issue.

With this information, you and your mechanic can determine what is causing the check engine light, and take appropriate steps for repair or maintenance.


In conclusion, resetting your Check Engine Light on a Dodge Challenger is fairly straightforward and doesn’t require any special tools. By following the steps provided in this blog post, you should have no trouble getting your light to turn off after addressing the underlying issue. If not, it may be time to bring your car into a professional mechanic who can help you identify and address any deeper problems with your vehicle.


  • Alex Gearhart

    Alex Gearhart, an automotive expert specializing in transmissions, has over a decade of hands-on industry experience. With extensive knowledge in manual and automatic systems, Alex is passionate about educating car enthusiasts on vehicle maintenance. As the chief author at, Alex simplifies complex concepts for readers, helping them make informed decisions about their vehicles. Outside of work, Alex enjoys road trips, restoring classic cars, and exploring new automotive technologies.

Leave a Comment