What Kind of Transmission Fluid Does a 4L60E Take

The 4L60E transmission uses Dexron III or Mercon automatic transmission fluid. It is important to check the owner’s manual for specific recommendations and use the exact type of fluid specified, because different fluids are designed for different transmissions and can damage a transmission if used incorrectly. Depending on manufacturer, Dexron III may be referred to as Dexronic II E, Mercon V or SPH-IV.

The 4L60E has an 18 quart capacity; however, it is recommended to only fill with 17 quarts after draining and replacing the filter.

The 4L60E transmission requires Dexron III or Mercon ATF fluid, as it is a hydraulic automatic transmission. These fluids are typically dyed red and have an extended operating temperature range to ensure smooth performance over a wide variety of driving conditions. It is important to use the correct type of fluid in the 4L60E to avoid potential damage – so make sure you check your owner’s manual for more information about which fluid you should be using for your specific vehicle.

2004 Chevy Silverado 4L60e Transmission Fluid and Filter Change – Tahoe Suburban Sierra Yukon 1500

What is the Best Transmission Fluid for a 4L60E?

When it comes to selecting the right transmission fluid for a 4L60E, there are many factors that need to be taken into consideration. The type of vehicle, engine size, and driving conditions all play an important role in determining which fluid is best suited for your application. Generally speaking, synthetic fluids are recommended over conventional fluids when it comes to transmissions as they provide superior protection against breakdowns due to excessive heat or wear and tear on components.

When choosing a transmission fluid specifically designed for use with the 4L60E transmission system, look for one that meets GM’s Dexron III/Mercon V specifications. This will ensure maximum performance from your vehicle’s drivetrain while providing excellent corrosion resistance and lubrication properties. Additionally, some manufacturers offer specially formulated blends of synthetic oil designed specifically for this particular model of transmission – these can be a great option if you’re looking for added protection and durability in demanding driving environments such as off-roading or high-performance racing applications.

Ultimately though, selecting the right transmission fluid should come down to what works best with your individual setup; consulting with an experienced mechanic or taking advantage of online resources can help make sure you get the most out of your ride without compromising its reliability or longevity down the road.

How Many Quarts of Transmission Fluid Does a 4L60E Transmission Hold?

The 4L60E transmission is a popular automatic transmission found in many General Motors vehicles. It is known for its durability and reliability, making it an ideal choice for drivers who want to enjoy smooth shifting and maximum power. One of the most important considerations when maintaining your 4L60E transmission is how much fluid it needs to operate properly.

So, exactly how many quarts of transmission fluid does a 4L60E transmission hold? The answer may surprise you – the capacity of the 4L60E can range from 13-14 quarts depending on make and model year. For instance, some models require 13 quarts while others need 14 quarts or more to be filled with Dexron/Mercon III or Mercon V ATF (Automatic Transmission Fluid).

It’s important not to overfill as this could lead to poor performance or even cause damage. In addition, regular maintenance such as changing out old oil should be done every 30k miles or so in order to ensure optimal performance levels are maintained.

What Kind of Transmission Fluid Does a 2000 4L60E Take?

The 2000 4L60E transmission requires a DEXRON-VI Automatic Transmission Fluid (ATF). This is the latest generation of General Motors’ automatic transmission fluid and is formulated to handle the higher torque, temperatures, and pressures of today’s modern transmissions. It has been specifically designed to resist oxidation and thermal breakdown while providing smoother shifts over its lifetime.

Additionally, it provides improved protection against foaming in both cold climates and hot summer months. When changing your transmission fluid, be sure to use only genuine replacements since cross brands or low quality oils may not meet specifications necessary for proper operation of the 4L60E.

What Does 4L60E Stand For?

4L60E stands for 4-speed, Longitudinally loaded, 6 000 pound gross vehicle weight, Electronic controlled transmission. This is a common automatic transmission used in many General Motors vehicles from the early 1990s to the mid 2000s. It was designed as a replacement for the 700R4 and has become one of GM’s most popular transmissions ever built.

The 4L60E was developed with an electronic control unit (ECU) that enabled it to shift smoother than its predecessor. It also allowed for better fuel economy due to improved shift points and increased torque converter efficiency. Additionally, it had greater reliability due to strengthened components such as a thicker output shaft, improved valve body design, and more robust internal parts like bushings and bearings.

These improvements made this transmission ideal for cars weighing up to two tons while providing excellent performance on light duty trucks or SUVs.

What Kind of Transmission Fluid Does a 4L60E Take

Credit: cpt4l60e.com

4L60E Transmission Fluid Capacity And Type

The 4L60E transmission is a highly reliable and dependable automatic transmission that was used in General Motors vehicles from the mid-1990s to the early 2000s. The recommended fluid capacity for this transmission is 8.4 quarts of Dexron III Automatic Transmission Fluid (ATF). It is important to only use ATF fluids with an SP specification, as using any other type of fluid can result in damage to your vehicle’s system.

4L60E Transmission Fluid Capacity With Torque Converter

The 4L60E transmission is a popular choice for vehicles that require an automatic transmission. It has a fluid capacity of approximately 11-12 quarts with the torque converter, so it is important to know how much fluid to use when refilling your vehicle. If you are unsure, consult your owner’s manual or contact an automotive specialist for advice on what type and amount of fluid should be used in your specific make and model.

4L60E Transmission Fluid Capacity Without Torque Converter

The 4L60E transmission fluid capacity without the torque converter is approximately 11.9 quarts (11.3 liters). It’s important to make sure you use the correct type and amount of fluid when servicing your transmission, as using the wrong type or too little can have serious consequences for your vehicle’s performance and longevity.


In conclusion, the 4L60E is a reliable and durable transmission system that requires specific types of fluids for optimal performance. Generally, Dexron III fluid should be used in most cases as it is designed specifically to meet GM’s specifications for this particular transmission. Additionally, synthetic base oils are recommended to help ensure durability and reduce wear on the parts over time.

Ultimately, by carefully selecting and maintaining the right type of transmission fluid, you can extend the life of your 4L60E transmission system while ensuring better overall performance.


  • Alex Gearhart

    Alex Gearhart, an automotive expert specializing in transmissions, has over a decade of hands-on industry experience. With extensive knowledge in manual and automatic systems, Alex is passionate about educating car enthusiasts on vehicle maintenance. As the chief author at TransmissionCar.com, Alex simplifies complex concepts for readers, helping them make informed decisions about their vehicles. Outside of work, Alex enjoys road trips, restoring classic cars, and exploring new automotive technologies.

Leave a Comment